MY20K10 - 12_1.0_11.01.2021
37
Assembly
5
Assembly
Assemble the S pedelec in a clean, dry
environment.
The
work environment
temperature should be
between 15 °C and 25 °C.
The fitting stand used must be approved for a
maximum weight of at least 30 kg.
5.1
Required tools
The following tools are required to assemble the
S pedelec:
5.2
Unpacking
The packaging material consists mainly of
cardboard and plastic film.
The packaging has to be disposed of in
accordance with the regulations of the
authorities.
5.2.1
Scope of delivery
S pedelec are fully assembled in the factory for
test purposes and then dismantled for
transportation.
The S pedelec is 95 - 98% pre-assembled. The
scope of delivery includes:
• the pre-assembled the S pedelec
• the front wheel
• the pedals
• quick release (optional)
• the charger
• the
operating and maintenance instructions
.
The battery is supplied separately from the
S pedelec.
Risk of eye injury
Problems may arise if the settings are not made
to components correctly and you may sustain
serious injuries as a result.
Always wear safety glasses to protect your
eyes during assembly.
Crash and crushing hazard caused by
unintentional activation
There is a risk of injury if the drive system is
activated unintentionally.
Remove the battery.
• Knife
• Hexagon socket spanner 2 (2.5 mm, 3 mm,
4 mm, 5 mm, 6 mm and 8 mm)
• Torque wrench with working range between
5 and 40 Nm
• Spline nut socket T25
• Ring spanner (8 mm, 9 mm, 10 mm), 13 mm,
14 mm and 15 mm) and
• Cross, flat head and ordinary screwdriver.
WARNING
!
CAUTION
!
