MY20K10 - 12_1.0_11.01.2021
53
Operation
6.4
Instruction and customer service
Your supplying specialist dealer will provide
customer service. Contact details can be found on
the S pedelec pass for these operating and
maintenance instructions. The specialist dealer
will explain all the S pedelec functions to you in
person, this being when the specialist dealer
hands over the S pedelec at the latest. These
operating instructions are provided to you with
every S pedelec so that you can consult them at a
later stage.
Your specialist dealer will also be happy to assist
you in the future whether you require
maintenance, conversion or repair.
6.5
Adjusting the S pedelec
Only a correctly adjusted S pedelec will guarantee
the desired ride comfort and health-promoting
activity. Therefore adjust the
saddle
, the
handlebars and the suspension
to your body and
your preferred riding style before the first ride.
6.5.1
Adjusting the saddle
6.5.1.1 Adjusting the saddle tilt
The saddle tilt must be adjusted to the seat height,
the saddle and handlebar position, and the saddle
shape to ensure an optimum fit. The seating
position can be optimised in this way if needed.
First adjust the handlebars, then the saddle.
Adjust the saddle tilt to horizontal.
Figure 56: Horizontal saddle tilt
6.5.1.2 Determining the seat height
To adjust the seat height safely, either
• push the bike near to a wall, so that the rider can
lean on the wall to support themselves or
• ask another person to hold the S pedelec.
1
Climb onto the S pedelec.
2
Place your heel on the pedal and extend your
leg, so that the pedal is at the lowest crank
rotation point.
The rider sits straight on the saddle if the seat
is at an optimum height. If this is not the case,
adjust the length of the seat post to your
needs.
Figure 57: Optimal saddle height
Crash caused by incorrectly adjusted torques
If a screw is fastened too tightly, it may break. If a
screw is not fastened enough, it may loosen. This
will cause a crash with injuries.
Always observe the indicated torque on the
screw or in the
operating and maintenance
instructions
.
CAUTION
!
