MY20K10 - 12_1.0_11.01.2021
84
Cleaning and servicing
7.2
Basic cleaning
Remove battery and on-board computer before
thorough cleaning.
7.2.1
Cleaning the frame
1
Soak the entire frame with dish-washing
detergent if the dirt is thick and ingrained.
2
After leaving it to soak for a short time, remove
the dirt and mud with a sponge, brush and
toothbrushes.
3
Use a watering can or your hand to rinse the
frame.
4
Service the frame after cleaning.
7.2.2
Cleaning the stem
1
Clean stem with a cloth and soapy water.
2
Service the stem after cleaning.
7.2.3
Cleaning the wheel
1
Check the tyres, rims, spokes and spoke
nipples for any damage while cleaning the
wheel.
2
Use a sponge and a brush to clean the hub and
spokes from the inside to the outside.
3
Clean the rim with a sponge.
7.2.4
Cleaning the drive elements
1
Spray the cassette, the chain wheels and the
front derailleur with a degreasing agent.
2
Clean coarse dirt with a brush after soaking for
a short time.
3
Wash down all parts with dish-washing
detergent and a toothbrush.
4
Service the drive elements after cleaning.
7.2.5
Cleaning the chain
1
Slightly dampen a brush with dish-washing
liquid. Brush both sides of the chain.
2
Dampen a cloth with soapy water. Place the
cloth on the chain.
3
Hold and apply slight pressure while slowly
turning the rear wheel, so the chain passes
through the cloth.
4
If the chain is still dirty afterwards, clean with
lubricant.
5
Service the chain after cleaning.
Required tools and cleaning agents:
• Cloths
• Sponge
• Air pump
• Brush
• Toothbrush
• Paintbrush
• Watering can
• Bucket
• Water
• Dish-washing liquid
• Degreaser
• Lubricant
• Brake cleaner or spirit
Crash caused by braking hard on rims
A rim can break and block the wheel if you brake
hard. This may cause a crash with serious
injuries.
Check rim
wear
on a regular basis.
WARNING
!
Notice
Never use aggressive (acid-based) cleaners,
rust removers or degreasers when cleaning
the chain.
Never use chain cleaning devices or chain
cleaning baths.
