MY20K10 - 12_1.0_11.01.2021
28
Overview
→
<Brgh backg. (Bright background)>
Select a black or white on-board computer design
→
<Imp. units (Imperial units)>
Select unit for speed and distance
→
<Language>
Setting the language
→
<Factory reset>
Resetting to factory settings. All user data will be lost
during reset.
– Information
Information on the Kiox on-board computer.
→
<Intro to Kiox>
Explanation of the key functions and screens
→
<Registration>
→
<FAQs>
Information on FAQs (frequently asked questions)
→
<Intro to Kiox>
→
<Certificates>
Certifications
→
<Licence info>
Information on licences
→
<Contact us>
Contact details
You will find a detailed description of the
individual parameters in the online operating
instructions at
www.Bosch-eBike.com/en/Kiox-manual
3.8.2.6
Additional journey information for
eShift Shimano DI2 and Rohloff
Only applies to S pedelecs with this equipment
The gear speed and shift mode (Manual M/
Automatic A) are always displayed on the start
screen. If you are currently viewing another
screen, the gear is displayed briefly when the gear
is changed. Since the drive unit detects the gear
shift and consequently reduces motor assistance
briefly, it is also possible to switch gears under
load or on hills. If the S pedelec is brought to a halt
from a speed greater than 10 km/h, the system
can automatically switch back to a pre-set start
gear.
3.8.2.7
Additional eShift system setting
Only applies to S pedelecs with this equipment
The following additional functions are available on
the function display:
Applies only to S pedelecs with eShift with
Shimano DI2 derailleur gears. The following
additional functions are available on the function
display:
Applies only to S pedelecs with eShift with
NuVinci H|Sync/enviolo with Optimized H|Sync
The following additional functions are available on
the function display:
3.8.2.8
System message
The drive system monitors itself continuously and
if an error is detected, it is indicated by a system
message. The system may switch off
automatically depending on the type of error. You
will find assistance for system messages in
Section
8.5 Initial help
. There is a table of system
messages in the Appendix.
Display
Change
SET START GEAR
You can change the gear in this
menu option.
Table 20: Additional journey information
Display
Change
ADJUST GEAR
This is where you can make a fine
adjustment to the Shimano Di2.
You will find the specified setting
range in the gear manufacturer's
operating and maintenance
instructions. Make the fine adjust-
ment as soon as you hear any
unusual noises from the gear shift.
Table 21: Additional journey information
Display
Change
CALIBRATION
This is where you can perform
a calibration on the continu-
ously variable gear. Follow the
instructions on the display.
Table 22: Changing the system settings
