MY20K10 - 12_1.0_11.01.2021
65
Operation
6.11.2 Charging the battery
The ambient temperature during the charging
process must be within the range from
0 °C to 40 °C.
The battery can remain on the S pedelec or can
be removed for charging.
Interrupting the charging process does not
damage the battery.
1
Remove the cable connection cover if
necessary.
2
Connect the mains plug of the charger to a
normal domestic, grounded socket.
3
Connect the charging cable to the battery's
charging port.
The charging process starts automatically.
The battery level indicator shows the charge
level during charging. When the drive system is
switched on, the
display screen
shows the
charging process.
The charging process is complete when the
LEDs on the battery level indicator go out.
4
Once charging is complete, disconnect the
battery from the charger.
5
Disconnect the charger from the mains.
6.11.3 Charging the dual battery
Only applies to S pedelecs with this equipment
.
6.11.3.1 Charging process when two batteries
are used
If two batteries are attached to an S pedelec,
charge both batteries via the non-sealed
socket.
The two batteries are charged alternately
during charging. Charging switches
automatically between the two batteries
several times. The charging time is twice as
long.
The two batteries are discharged alternately
during use.
6.11.3.2 Charging process when one battery
is used
If only one battery is inserted, only charge the
battery with an accessible charging socket.
Charge the battery with the sealed charging
socket outside its mount only.
Connection data
230 V, 50 Hz
Notice
Check that mains voltage! The power source
voltage must match the voltage indicated on
the charger nameplate. Chargers labelled
230 V may be operated at 220 V.
Notice
If an error occurs during the charging process, a
system message is displayed.
Remove the charger and battery from
operation immediately and follow the
instructions.
Notice
Charge the battery via the accessible charging
socket only.
Never open a sealed charging socket.
Charging via a pre-closed charging socket can
cause irreparable damage
