Kesla XS 190, Operation & Maintenance Manual

Page: 5 / 83

Kesla
®
XS
190
SELF PROPELLED TELESCOPIC PLATFORM
4
INTRODUCTION
Kesla XS 190 is a self-propelled telescopic access platform provided with it own diesel
engine or an optional 380V electric pump unit. XS 190 is intended for lifting personnel for
instance in building and renovation sites, parks, and shipyards etc. Due its four-wheel
drive and four-wheel steering, XS 190 is very agile, and can easily travel in difficult terrain
when driven from the platform.
Because all essential controls are centralized to the platform, XS190 Access Platform can
be controlled from the platform in any normal operating situation. Similarly, the electrical
junction box and the controls for ground operation are located on the turntable. The brakes
of the Access Plateform are locked automatically when the pressure of the drive motors
decreases. The electrical emergency lowering system can be controlled from the platform
and from the turntable.
Due to its telescopic boom, XS 190 has a wide side reach. The 360º slewing
mechanism. jib boom and turning platform enhance flexibility.
XS 190 Aceess Platform has many safety-improving functions. Good knowledge of all
these functions helps carry out work efficiently and safely.
Please check the condition of the access platform every day according to these
instructions prior to starting the work. Do not use the Access Platform if it is not in order or
if it has not been serviced or inspected.
The manufacturer reserves the right to change the construction, equipment as well as the
maintenance instructions of the machine without advance notification.
With wishes of elevating success
KESLA OYJ