Kesla XS 190, Operation & Maintenance Manual

Page: 45 / 83

Kesla
®
XS
190
SELF PROPELLED TELESCOPIC PLATFORM
44
7. For parking, anchor the Access Platform to a fixed object.
TRANSPORTING THE ACCESS PLATFORM
Do the following before transport.
1.
Drive the boom to the transport position and raise the outriggers.
2. Strap the Access Platform carefully onto the transport base. Use the towing eyes on
the chassis and the lifting points on the rear axle. If needed, place wedges in front of and
behind the wheels to prevent rolling.
3.
Fasten the boom steadily onto the transport support or strap the platform carefully
to the transport base to avoid straining the boom during transport. Do not pull the ropes
over the boom; instead, use the fastening eyes in the wheel axles.
4.
Switch off the voltage by the main power switch.
5. Check the total height before leaving.
M8
M8 x 60
R1/4”
R1/4” x 75
The illustration shows the brakes, the special nipple and the M8 bolt (all
four wheels).(These are standard with the Access Platform.)