KERR Touchsteam 33405, Instruction Manual

Page: 5 / 60

FILLING CAP
TouchSteam Steam Cleaners are equipped with a patented
Safety-Filling Cap that acts as both a safety valve and
antiremoval device. When pressure in steamer rises over 4.3
PSI (0.3 Bars), it is not possible to remove the fi lling cap. In
case of overpressure, cap is designed to let steam escape from
the bottom of the cap when pressure hits 79.8 PSI (5.5 Bars) or
higher. It is recommended that you replace the complete fi lling
cap every 18 months of operation, as the internal parts and
gaskets will wear.
LIMITED WARRANTY - LIMITATION OF KERR LIABILITY
Kerr’s technical advice, whether verbal or in writing, is designed to assist dentists and
laboratories in using Kerr products. The dentist or laboratory assumes all risk and liability for
damages arising out of the improper use of Kerr products. In the event of a defect in material or
workmanship, Kerr liability is limited, at Kerr’s option, to replacement of the defective product
or part thereof, or reimbursement of the actual cost of the defective product. To take advantage
of this limited warranty, the defective product must be returned to Kerr. In no event shall Kerr be
liable for any indirect, incidental, or consequential damages.
EXCEPT AS EXPRESSLY PROVIDED ABOVE, THERE ARE NO WARRANTIES BY KERR, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES WITH RESPECT TO DESCRIPTION, QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE.
PARTS SCHEMATIC