Kernau KIGH 6422 CI B, Instruction Manual, Page: 54 / 108

EN
54
TECHNICAL DATA ON THE DATA LABEL
TECHNICAL DATA FOR THE APPLIANCE GAS REGULATION
In case of adaptation of the hob to another type of gas, operate as described in the directions for the and
installation use and replace the label on the bottom with the one provided in the spare bag.
TECHNICAL ASSISTANCE AND SPARE PARTS
Before leaving the factory, this appliance will have been tested and regulated by expert and specialized
personnel in order to guarantee the best performances.
Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel
with the utmost care and attention.
For this reason, always contact your Dealer or our nearest After Sales Service Center whenever repairs or
adjustments are required, specifying the type of fault and the model of the appliance in your possession. Please
also note that genuine spare parts are only available from our After Sales Service Centers and authorized retail
outlets. The above data are printed on the data label put on the inferior part of the appliance and on the packing
label. The above informations give to the technical assistant the possibility to get fit spare parts and a heaven-
sent intervention.
We suggest to fill the table below:
MARK:
MODEL:
SERIES:
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE).
This guideline is the frame of a European-wide validity of return and recycling on Waste
Electrical and Electronic Equipment.
CHAPTER 9. TECHNICAL DATA
Model KIGH 6422 CI B
Cat II2H3+
Voltage 220-240V
Frequency 50-60 Hz
ΣQn Natural (G20) 20 mbar 3,8 kW
ΣQn Butane (G30) 37 mbar 276 gr/h
ΣQn Propane (G31) 37 mbar 271 gr/h
EE Gashob 56,0%
Rated Power El. Induction (W) 3600