Kernau KIGH 6422 CI B, Instruction Manual, Page: 37 / 108

EN
37
WARNING FOR USE:
• The appliance is built to perform the following function: cooking and heating food. Every other use
must be considered improper.
• Never use this appliance to heat the room.
• Do not attempt to change the technical characteristics of the product because it can be dangerous.
• If you should not to use this appliance any more (or replace an old model), before disposing of it,
make it inoperative in conformity with current law on the protection of health and the prevention of
environmental pollution by making its dangerous parts harmless, especially for children who might
play on an abandoned appliance.
• Do not touch the appliance with wet or damp hands or feet.
• Do not use the appliance barefoot.
• The manufacturer will not be liable for any damage resulting from improper, incorrect or unreasonable
use.
• If the ceramic hob is not cleaned immediately there is a risk of forming encrustations which are
impossible to remove after the hob has cooled or has been reheated several times.
• Do not use gloves when programming the hob. Press with clean fingers and touch the glass gently.
• Do not leave any type of metallic object, such as forks, knives, spoons or lids on the hob, as they might
accumulate heat, posing a hazard.
• The hob operates in compliance with the current legislation on electromagnetic fields and interference
deriving from their use. The appliance in fully compliant with the legal requirements in force. Wearers
of pacemakers or other similar devices must ensure that these appliances have been built or operate in
compliance with the above legislation.
• Wearers of pacemakers or other similar devices must be certain that the operation of these devices is
not disturbed by the magnetic field generated by the hob, which has a frequency between 20 KHz and
50 KHz.
INSTRUCTIONS FOR THE USER
Every time a symbol is pressed it is confirmed by a beep. The functions of hobs that use this type of technology
are activated by gently pressing the symbols printed on the surface. When connecting to the electricity supply
for the first time, an operating check will be run and all the warning lights will light up for a few seconds.
ARRANGEMENT OF THE HEATING ELEMENTS
FRONT:
BACK:
Every time the hob is reconnected to the electricity supply, the control panel lock is active and the relative
led in on.
After removing the control panel lock (by pressing the symbol for 1 second), switch on the hob by pressing
the key for a few seconds.
If no function is activated within 10 seconds, the hob will switch off automatically.