Kernau KBO 1076 S PT B, Instruction Manual

Page: 44 / 64

EN 44
00
6
560
560
600
83
ni
m
40
Rys. A
59
5
560
560
40
40
Rys. B
Rys. C
CHAPTER 4. INSTALLATION
OVEN MOUNTING
• The kitchen room should be dry and ventilated.
It should have also functional ventilation, and the
placing of the oven should ensure easy access to its
controlling elements. Primarily the power plug shall
be easily accessible.
• The oven is built in Y class. Built-in furniture shall
have cladding and adhesives for it gluing resistant to
100oC temperatures. Not obey this condition, may
cause in deforming the surface or peeling off the
cladding.
• Prepare the opening in the cabinet with the dimensions
given on the picture: A- built-in under the countertop,
B – high built-in. In case of presence in the cabinet the
rear wall – cut the opening for electrical wires.
• Push oven completely into the opening and secure it
with four screws against sliding out (Pic. C)
ATTENTION:
Mounting of the device should be conducted by qualified technician. The activities connected with
installation shall be conducted when the device is disconnected from the power supply system.