KERN KERN YDB-03 Operating Manual Download Page 97

Page: 97 / 115

YDB-03-BA-e-2114

when re-immersing into the liquid, no additional bubbles adhere; it is better to use
pincers or alike to place the sample directly on the sifting bowl.



Wait for stability display [ ], take over the weight value „sinker in test liquid“ using

the

PRINT

button. The weighing balance will first determine then display the

fluid’s density.



When an optional printer is connected, the displayed value can be edited using

the

PRINT

button.

Printout example (KERN YKB-01N):

d: 2.0000 g/cm

Return to weighing mode



Press the

ON/OFF

key



or use the

MENU

button to start a new measuring cycle.

If at the density determination errors have appeared, „d-----„ is displayed.

To avoid corrosion, don't leave the density set immersed in liquid for a long time.

Summary of Contents for KERN YDB-03




















































































































Search results

Summary of Contents for KERN YDB-03

Reviews:

Brands by name

Popular brands

KERN KERN YDB-03, Operating Manual

Search results

Summary of Contents for KERN YDB-03

Reviews:

Brands by name

Popular brands