KERN KERN YDB-03 Operating Manual Download Page 77

Page: 77 / 115

YDB-03-BA-e-2114

5. Press the navigation buttons (





) repeatedly until „

“ is displayed. To confirm,

press

TARE

, "SET" followed by your current setting will be displayed.

6. Press the cursor keys (





) repeatedly until “L.DENS“ ("density determination

fluid" mode) appears.

7. Confirm with

TARE

key. "SET" followed by the display for entering the sinker

volume will be displayed.

8. Press

TARE

key and the display will change to numeric data input.

indicates that the weighing balance is in numeric input mode. The first digit is

flashing and can be changed.
Using the cursor keys, enter the drop shaft’s volume (See chap. 6).

Numeric input

indicates that the weighing balance is in numeric input mode. The first digit is

flashing and can be changed.



Increase flashing digit



Decrease flashing digit



Digit selection to the right

Confirm entry

9. The balance changes into the mode for density determination of liquids.

To change from density mode



to weighing mode press

MENU

for 3 s.

Summary of Contents for KERN YDB-03




















































































































Search results

Summary of Contents for KERN YDB-03

Reviews:

Brands by name

Popular brands

KERN KERN YDB-03, Operating Manual

Search results

Summary of Contents for KERN YDB-03

Reviews:

Brands by name

Popular brands