YDB-03-BA-e-2114
51
5.6 Series KERN ALT-B, TALJG-A, TALSG-A
5.6.1 Determine density of sinking solid bodies (d >1 g/cm
3
)
Remove the immersion basket and place the glass beaker filled with the auxiliary
liquid in the centre of the platform. Filling height should be approx. ¾ of the
capacity. Make sure that it has no contact with the frame.
Remount the immersion basket. Make sure that it does not touch the glass
beaker.
In weighing mode press
MENU
button. The master menu will be displayed.
Use the navigation buttons
to select the menu item „Density“.
Acknowledge using
button, the current setting is displayed.
Use the navigation buttons
to select setting „Solid body“.
Confirm using the
button, the set density of the aid liquid is displayed
(factory setting 1.0000 g /cm
3
for distilled water at 20°C).
To change press
TARE
key (see chap. 8).
Use the navigation buttons
to increase/reduce the digit. Use the
TARE
button
to select the next digit. Repeat this sequence for each digit. To delete keep
pressed the
TARE
button.
Confirm entry with
button, the display for calculation of „Weight in air“ is
displayed.
Should the balance not show Zero, press the
TARE
button.
