AES/AEJ-BA-e-0912
62
5. Press and hold the
TARE
-key until the display
used for entering the limit appears.
Each time the
TARE
-key is pressed, numbers will
run through from 0-9 and the decimal point.
⇒
0
⇒
0 1
⇒
⇒
⇒
≈
2 9
Select the number to be changed using
F
key (the
active position flashes):
6. Save by pressing the
S
-key. The lower limit will
briefly be faded in, followed by [
H. SET
] (This
completes the entry provided only one limit is set
for tolerance control – menu setting
[
23. P
1
.1
]
)
H. SET
1
7. Wait until the display starts flashing and the most
recently upper limit is displayed. Enter upper limit
by repeating 5-6.
0.0000
g
M
8. Save by pressing the
S
-key.
The upper limit will briefly be faded in and the weigh-
ing balance returns to tolerance weighing mode.
Remove sample. From here evaluation takes place
whether the goods to be weighed are within the two
tolerance limits.
0.0000
g
•
Numeric entry of 3 or 4 limits
Menu setting
[
23. P
1
.
3
]
or
[
23. P
1
.
4
].
For numeric entry of limits proceed as for entry of 2 limits. Instead of [
L. SET
] and
[
H. SET
] appears
[L1. SET
] - [
L3. SET
] or [
L4. SET
]. For this purpose repeat step 5
to 7 in each case.
