burger press attachment
cl
lid
cm
burger press main body
cn
plunger
to use your burger press
1 Assemble the burger press by fitting
the main body
cm
over the plunger
cn
. Fit the lid
cl
and push down to
lock on
9
.
2 Make up the required burger mix
(see recipe supplied).
3 Turn the burger press upside down
bk
and push the flat section down to
lock in place. Place a disc of grease
proof or waxed paper inside the
main body.
4 Spoon in the burger mix (approx
120g/5oz) to just below the rim of
the burger press and spread evenly.
Place another disc of grease proof or
waxed paper on top of the burger
mix.
5 Release the burger mix by either
pushing the main body down the
plunger or turning the burger press
over and push the plunger down to
release the burger.
burger recipe
(Makes 4 burgers)
450g/1lb fine minced beef
1 onion – finely chopped
Season as required
1 Mix the minced beef, onion and
seasoning together in a bowl.
2 Divide the mix into 4 and then add
to the burger press (see to use your
burger press) to form the burgers.
3 Either brush with oil and place under
a preheated grill for 4 – 5 minutes on
each side, or shallow fry over a
medium heat.
care and cleaning
●
Always switch off and unplug before
cleaning.
power unit
●
Wipe with a damp cloth, then dry.
●
Never immerse in water or use
abrasives.
meat grinder attachment
1 Loosen the ring nut manually or with
the spanner
4
and dismantle. Wash
all the parts in hot soapy water, then
dry.
Don’t wash any part in the
dishwasher.
Never use a soda
solution.
2 Re-assemble.
3 Wipe the screens with vegetable oil,
then wrap in greaseproof paper to
prevent discolouring/rusting.
4 Remove the lid of the pusher and
store the sausage and kebbe
attachments inside
bl
.
burger press
1 Take the burger press apart by
removing the lid
cl
to release the
main body
cm
from the plunger.
2 Wash the parts and dry thoroughly.
sausage fillers/kebbe maker
Wash in hot soapy water and dry
thoroughly.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your appliance or
●
servicing or repairs
●
Contact the shop where you bought
your appliance.
●
Designed and engineered by
Kenwood in the UK.
●
Made in China.
7
