9
troubleshooting guide
Problem
Cause
Solution
Meat grinder does not
No power.
Check meat grinder is
operate.
plugged in.
Check the fuse/circuit breaker
in your home.
If none of the above see
“service and customer care”
section.
Meat Grinder stops or
Stalls due to food
Switch off and turn the
slows during operation.
clogging.
control to R(reverse) for a few
seconds to release clogged
food.
Poor minced results.
Cutter fitted the
Check cutter fitted correctly
wrong way round.
with cutting side facing
outermost.
Clogging occurring
Switch off and unplug and
behind the screen.
dismantle the attachment.
Clean and refit.
Food forced down
Gently guide the food down
feed tube too
the feed tube using the
quickly.
pusher, one piece at a time.
Allow the scroll to pick up
each piece before adding the
next piece.
Ring nut difficult to
Overtightened when Tighten the ring nut firmly by
remove after mincing
fitted.
hand.
process.
Use the spanner supplied to
undo after use.
Meat grinder attachment
Meat grinder
Hold the release button down
cannot be removed from
attachment not
on the top of the power unit
power unit.
unlocked from
as you rotate the feed tube
power unit.
towards the front of the meat
grinder.
