
NX-900
44
ADJUSTMENT
Controls
KMC-36
Modular
MIC jack
Keypad
[HOOK]
Channel Up/Down key
[PTT]
Power switch
Volume Up/Down key
Programmable function keys
Panel Test Mode
■
Test mode operation features
This transceiver has a test mode.
To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily.
Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■
Key operation
Key
“FNC” not appears on the sub LCD display
Function
Display
[ ] / [ ]
Test CH up/down
Channel No.
[ ] / [ ]
Volume up/down
-
[ ]
Push: Squelch level up
Hold: Squelch off
Squelch level
Squelch off:
icon appears
[ ]
Wide 5k/Wide 4k/Narrow/
Very narrow
Wide 5k: “w”
Wide 4k: “s”
Narrow: “n”
Very narrow: “v”
[ ]
Shift to panel tuning mode
-
[ ]
Function on
“
FNC
” appears on the sub
LCD display
[ ]
MSK 1200bps and 2400bps 2400bps: icon appears
[
]
Test signaling CH up
Signaling No.
Key
“FNC” not appears on the sub LCD display
Function
Display
Microphone key
[PTT]
Transmit
-
[0] to [9]
and [A]
to [D],
[#], [ ]
Use as the DTMF keypad.
If a key is pressed during
transmission, the DTMF
corresponding to the key
that was presses is sent.
-
Key
“FNC” appears on the sub LCD display
Function
Display
[ ]
Talk Around on/off
On: icon appears
[ ]
Analog/NXDN
Analog: “A”
NXDN: “N”
[ ] / [ ]
Function off
-
[ ]
-
-
[ ]
LCD all lights
LCD all point appears
[ ]
High power/Low power
Low:
icon appears
[ ]
Function off
-
[ ]
Compander on/off
On: icon appears
[
]
Beat shift on/off
On:
icon appears
Microphone key
[PTT]
Transmit
[0] to [9]
and [A]
to [D],
[#], [ ]
Function off
-
• LED indicator
Red LED
Lights during transmission.
Green LED
Lights when there is carrier.
• Sub LCD indicator
“FNC”
Appears at function on.
• LCD display in panel test mode
Channel No.
(Power ON)
(After 2sec.)
Market code
Frequency range
“800MHz”:
806~870MHz
Aw: Analog wide 5k mode
As: Analog wide 4k mode
An: Analog narrow mode
Nn: NXDN narrow mode
Nv: NXDN very narrow mode
Sub LCD display
Signaling No.
Main LCD display
Squelch level
(Analog mode only)
Temperature
K
Aw SQ 5
1 -
1
2 5
+
8 0 0
H
M z
Talk Around
Summary of Contents for NEXEDGE NX-900
Page 105: ...NX 900 105 MEMO ...
Page 106: ...NX 900 106 MEMO ...