Kenwood KRF-X9992D, Connection And Setup Manual

Page: 80 / 145

Using P
o
w
erT
ouch
Audio-Video Receiver KRF-X9992D 21
How Do I Adjust the Sound?
• If you turn off the receiver, select a different source device, or
switch to the analog connections, the digital input mode is
reset to “auto.”
• If the incoming signal is not Dolby Digital or MPEG, the
listen mode reverts to the last listen mode you selected for
that input.
• If the speakers are turned off (i.e., because you are listening
on headphones), you cannot manually select Dolby Pro
Logic or Dolby 3 Stereo.
• When you use “Digital Auto” mode with certain DVD and LD
players, performing operations such as “Skip” or “Stop” may
momentarily interrupt the output. This could switch the
“Listen Mode” automatically to the surround mode intended
for the input signal if you have manually selected a different
listen mode.
Switching to Analog Input
To fully enjoy the sonic benefits of specially-encoded 2-channel
DVD AUDIO discs played on a compatible DVD player, you
must set the receiver’s input to Analog. To do so, select .
“ANALOG” appears on the front panel of the receiver.
When you are finished listening to analog media, set the
receiver’s input back to digital. To do so, select the icon.