Kenwood KRF-X9992D, Connection And Setup Manual

Page: 17 / 145

11
Chapter One : Connecting Your Devices Audio-Video Receiver KRF-X9992D
Connections
Connecting Your Cable TV or Satellite Tuner, continued
Do not plug in the receiver or devices to AC power
until you have connected all your devices.
This section focuses on the connections from your
cable or satellite tuner to the KRF-X9992D. Please
refer to your tuner’s instructions for more detail
about its connection jacks and capabilities.
The instructions in this section show one of several
possible variations on connecting your tuner. For
further assistance on optional configurations,
contact your cable or satellite provider.
To Connect a Cable TV Tuner with a
Composite (RCA) Video Output:
1. Review the information under “Before You
Begin” on page␣ 1. It contains important notes
about the types of video connections you can
make.
2. Connect the audio and video cables from the
cable tuner’s Audio and Video Out jacks to the
receiver’s VIDEO 2, VIDEO 3, or VIDEO 4 PLAY
IN jacks as shown to the left.
3. Go to “Noting Your Devices” on page␣ 3 and note
which jack you used to connect your tuner. In
addition, note the brand name and model
number of the tuner.
To Connect a Cable TV Tuner without a
Composite (RCA) Video Output:
1. Review the information under “Before You
Begin” on page␣ 1. It contains important notes
about the types of video connections you can
make.
2. Connect the audio cables from the cable tuner’s
Audio Out jacks to the receiver’s VIDEO 2,
VIDEO 3, or VIDEO 4 PLAY IN jacks as shown to
the left.
3. Leave the cable tuner’s video out (RF jack)
connected directly to your VCR or TV (wherever
you already have it connected). See “How Do I
Operate Devices?” on page␣ 26 of the
Users’ Guide
for details about using this setup.
4. Go to “Noting Your Devices” on page␣ 3 and note
which jack you used to connect your tuner. In
addition, note the brand name and model
number of the tuner.
To Connect a Satellite Tuner:
1. Review the information under “Before You
Begin” on page␣ 1. It contains important notes
about the types of video connections you can
make.
2. If your satellite receiver has a digital output, use
the table below to select a jack set:
Note that the jack sets are linked, even though
they are not adjacent. You
must connect all of
the cables from your satellite receiver to a linked
jack set. For example, if you connect the analog
cables to VIDEO2 and the digital optical cable to
VIDEO4,␣ your satellite receiver will not work
correctly.
3. Connect the audio and video cables from the
satellite tuner’s Audio and Video Out jacks to the
receiver’s VIDEO 2, VIDEO 3, or VIDEO 4 PLAY
IN jacks as shown to the left.
4. Go to “Noting Your Devices” on page␣ 3 and note
which jack you used to connect your tuner. In
addition, note the brand name and model
number of the tuner.
optical VIDEO4
coaxial VIDEO2 or 3
If your digital
cable is... Choose this jack
set...