Kenwood KRF-X9992D, Connection And Setup Manual

Page: 142 / 145

Audio-Video Receiver KRF-X9992D 83
T
roubleshooting
When I press a key to tune to a preset station, the receiver
does not respond
Check whether:
• The receiver has been unplugged for more than three days. If
it has, your settings were cleared from the receiver’s memory.
See “My receiver won’t turn on and the STANDBY indicator is
flashing” on page␣ 79 of this manual.
• The Tuner input is selected. See “Tuner” on page␣ 50 of this
manual.
Macro is not running as I programmed.
• Because PowerTouch can only transmit one command at a
time, stagger the timings of the various macro settings so that
the commands are given at different times.
• On or Off command for audio devices may not work cor-
rectly if they are not Kenwood components connected via
system control cables.
• On or Off command for TV monitor may not work correctly.
If it is already on, On command turns it off, and if it is
already off, Off command turns it on.
When the listen mode is in “6ch Input”, there are
commands which the receiver does not accept.
• When in “6ch Input” mode, the commands such as selecting
a different listen mode, Speaker A/B switching,
CD2/TAPE2 MONITOR switching, sound adjustment and
speaker level adjustment.
Receiver/Tuner