Kenwood KRF-X9992D Connection And Setup Manual Download

Page: 116 / 145

Using P

erT

ouch

Audio-Video Receiver KRF-X9992D

2. Touch a source device. This will be the device you are record-

ing

from

, like a DVD or CD player. PowerTouch displays the

destinations able to record from that source:

3. Touch a destination device, then touch

. PowerTouch

displays the control screen for the destination device, with
two additional buttons on the left-hand side:

a. Touch (Source) to switch to the control screen for the

source device and get it ready to play.

b. Touch (Destination) to switch to the control screen for

the destination device and get it ready to record.

4. Touch the record control on the destination device, then

switch to the source device and touch the play control.

5. Touch any Quick Access button to change to that menu.

How Do I Record (Edit Mode)?

Summary of Contents for KRF-X9992D


















































































































































Search results

Summary of Contents for KRF-X9992D

Reviews:

Related manuals for KRF-X9992D

Brands by name

Popular brands

Kenwood KRF-X9992D, Connection And Setup Manual

Search results

Summary of Contents for KRF-X9992D

Reviews:

Related manuals for KRF-X9992D

Brands by name

Popular brands