manualshive.com logo in svg

Kenwood KCH-16, Service Manual

Share
Download
Kenwood KCH-16 Service Manual Download Page 4

KCH-16

4

REALIGNMENT

The mode when the KCH-16 Handheld control head is connected with the TK-5710/5710H/5810/5810H transceiver via the 

KRK-11 Interface box and KRK-11 Panel assembly is described below.

1. Modes

●

 Transceiver (TK-5710/5710H/5810/5810H)

User mode

Panel test mode

Firmware version information

Panel tuning mode

Data programming mode

PC test mode

PC tuning mode

PC mode

Clone mode

Firmware pro-
gramming mode

Clock adjustment mode

Transceiver information mode

Self programming mode

Mode

Function

User mode

For normal use.

Panel test mode

Used by the dealer to check the funda-
mental characteristics.

Panel tuning mode

Used by the dealer to tune the trans-
ceiver.

PC mode

Used for communication between the 
transceiver and PC (IBM compatible).

Data programming 
mode

Used to read and write frequency data 
and other features to and from the trans-
ceiver.

PC test mode

Used to check the transceiver using the 
PC. This feature is included in the FPU. 
See panel tuning.

Firmware program-
ming mode

Used when changing the main program 
of the fl ash memory of the transceiver.

Clone mode

Used to transfer programming data from 
one transceiver to another.

Self programming 
mode

You can program the frequency, signal-
ing and other functions using only the 
transceiver.

Firmware version 
information

Used to confi rm the internal fi rmware 
version.

Clock adjustment 
mode

Used by the dealer to adjust date and 
time.

Transceiver informa-
tion mode

Used to confi rm the transceiver fi rmware 
version.

●

 KCH-16

KCH-16 Firmware
programming mode

Mode

Function

KCH-16 Firmware 
programming mode

Used when changing the main program 
of the fl ash memory of the KCH-16.

Summary of Contents for KCH-16






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands