Kenwood KCH-16, Service Manual

Page: 12 / 85

KCH-16
12
Keypad input mode
Item
Key
RX Frequency TX Frequency RX Signaling TX Signaling
[S] Cancel the keypad input mode (Return to the normal mode)
[A] Cancel the keypad input mode (Return to the normal mode)
[B] Delete the least digit from the current number (Press and hold to delete all numbers.)
[C] Unused ON/OFF switching QT/DQT(N)/DQT(I)/OFF switching
[Orange] Unused
[ ]/[ ] Unused
[ ] Unused
[ ] Unused
Keypad ([0] to [9]) Add a digit to the current number (Return to the normal mode automatically if all digit are entered.)
Keypad ([ ]) Cancel the keypad input mode (Return to the normal mode)
Keypad ([ ]) Delete the least digit from the current number (Press and hold to delete all numbers.)
PTT Unused
●
Self programming mode fl ow chart
TX NAC
RX NAC
TX Signaling
[A]
RX Signaling
[A]
*1
*2
TX Frequency
RX Frequency
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
[A]
When the [C] key is pressed,
new data is written into memory.
Zone/Channel
[A]
Read authorization password entry (6 digits)
[A]
[ ] + Power ON
[TX Frequency] : Other than “OFF”
[Channel Type] : “MIXED”
[TX Frequency] : Other than “OFF”
[Channel Type] : “ANALOG” or “MIXED”
[TX Mode] : “ANALOG”
[TX Frequency] : “OFF”
Talkgroup ID List Amount must not be 0.
or
[TX Frequency] : Other than “OFF”
[Channel Type] : “MIXED”
[TX Mode] : “ANALOG”
Talkgroup ID List Amount must not be 0.
[TX Frequency] : Other than “OFF”
[Channel Type] : “P25” or “MIXED”
If [Channel Type] is set to “MIXED”,
[TX Mode] must be set to “P25”.
[Channel Type] :
“ANALOG” or “MIXED”
[A]
[Channel Type] : “P25”
[TX Frequency] : “OFF”
or
[Channel Type] : “ANALOG” or “P25”
[TX Frequency] : “OFF”
[Channel Type] : “P25” or “MIXED”
or
[TX Frequency] : Other than “OFF”
[Channel Type] : “MIXED”
[TX Mode] : “P25”
[A]
[TX Frequency] : “OFF”
[Channel Type] : “ANALOG”
[A]
[Channel Type] : “ANALOG”
[A]
[TX Frequency] : “OFF”
Talkgroup ID List Amount : 0
or
[TX Frequency] : Other than “OFF”
[Channel Type] : “MIXED”
[TX Mode] : “ANALOG”
Talkgroup ID List Amount : 0
[A]
Talkgroup ID List Amount : 0
[Channel Type] : “MIXED”
[Channel Type] : “P25“ or “MIXED”
Talkgroup ID List Amount must not be 0.
Self programming mode
Input Password
OFF QT
OFF
Zone selection
P25
Channel selection
Talkgroup List No.
[A]
[C]
DQT N
[C]
[C]
[C] [C] [C]
[C] [C] [C]
DQT I
[B]
ANALOG Channel Type
[B]
[B]
P25 ANALOG TX Mode
Channel Spacing 12.5kHz 25.0kHz
12.5kHz
*1 [Channel Type] : “ANALOG” or “MIXED”
*2 [Channel Type] : “P25”
P25 12.5kHz
[B]
[B]
[B]
MIXED
[B]
OFF QT DQT N DQT I
REALIGNMENT