Splitter input
N type, approx 6kV into 50
1
Timing:
Trigger input to pulse out delay
~31ns (direct mode)
~50ns (delay mode)
Trigger input to pretrig
out
~18ns (delay mode - delay set to minimum)
Jitter
<10ps RMS
Controls:
Mode
Sets one of the following modes:
Single shot (delay active)
0.05 to 0.5Hz (delay active)
0.5 to 5Hz (delay active)
5Hz to 50Hz (delay active)
50Hz to 500Hz (delay active)
External trigger (delay active)
External trigger (delay inactive)
Fine rate
Varies internal rate by a ratio of 10:1
Coarse delay
Varies internal delay in ~10ns steps
Fine delay
Varies internal delay continuously over ~15ns
Single shot button
Gives a single trigger in single shot mode
Power
Switches AC power in the pulser
Keypad
Up, Down, Left and Right keys
Indicators
:
Power
Shows that AC power is applied and the unit is switched
on
Triggered
Illuminates when the unit is triggered
LCD
Four line 20 character display
PBG5 four channel trigger module
Number of outputs
Four
Polarity
negative
Output amplitude
>12kV into 50 ohms.
