![Kentech Instruments PBG7 Manual Download Page 27](http://html1.mh-extra.com/html/kentech-instruments/pbg7/pbg7_manual_1955363027.webp)
Rise time
<=100ps (10 to 90%)
Pulse width
~2ns FWHM
Maximum rep rate
>=500Hz
Trigger to output jitter
<15ps rms
Channel to channel jitter
<15ps rms
Output protected against open circuit, short circuit and arcing loads.
MTBF
approx 10^10 shots
Output connectors
HN x 4
Outputs:
Pulse outputs
HN
Inputs:
Trigger inputs
4 x BNC approx 500V iinto 50
1
, <0.5ns risetime
AC power
IEC, 110 to 240V ac, 50/60Hz
System control
2 x 9 way D type
Timing:
(refered to trigger input on the trigger module)
Trigger input to pulse out delay
~52ns (direct mode)
~71ns (delay mode)
Indicators
:
Power
Shows that AC power is applied and the unit is switched
on
Triggered
Illuminates when the unit is triggered
PBG7 output module and power supply
Number of outputs
One
Polarity
negative
Output amplitude
>45kV into 50 ohms.
Rise time
<=150ps (10 to 90%)
Pulse width
~2ns FWHM
Maximum rep rate
>=500Hz
Trigger to output jitter
<20ps rms
Channel to channel jitter
<15ps rms
Output protected against open circuit, short circuit and arcing loads
MTBF
approx 10^10 shots