MAIN MOTOR
ENGLISH
SERVICE MANUAL
30
1463165000(1)2007-02
Edge 28B
MAIN MOTOR DISASSEMBLY/ASSEMBLY
Disassembly
Remove the hood (see the procedure in the relevant paragraph).
Remove the battery (see the procedure in the relevant paragraph).
Disconnect the connections (A) and (B) of the main motor (C).
Place a suitable shim (E) under the machine frame area (D) in order to keep the right wheel (F) lifted and remove it.
Remove the retaining ring and the washers (G), then remove the right wheel (F).
Loosen the nut (H) and move away the clutch (I) from the shaft (J).
Move the belt (K) by hand and disengage the belt (L) from the pulley (M).
Disengage the belt (N) from the pulley (O).
Remove four screws (P), then remove the holder (Q) and the belt (K) by disengaging it from the pulley (R).
Remove the retaining ring (S) and the pulley (T), then recover the key (U).
Remove the screw (V), then remove the main motor (W).
Assembly
Perform steps 6 to 11 in the reverse order.
Visually inspect and adjust the driving belts and clutch (see the procedure in the relevant paragraph).
Perform steps 1 to 5 in the reverse order.
G
E
D
L
F
M
H
I
R
J
Q
K
P
N
O
B
A
C
S301607
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
