SKIRT
ENGLISH
SERVICE MANUAL
16
1463165000(1)2007-02
Edge 28B
SKIRT HEIGHT AND OPERATION CHECK
Drive the machine on a level ground that is suitable for checking the skirt height.
Turn the main switch (1) to “0”.
Check that the distance from the ground of the side skirts (A and B) is 0 to 0.08 in (0 to 2 mm).
Check the skirts for integrity, cuts or tears, which can reduce the machine vacuum capabilities. If necessary replace the
side skirts (see the procedure in the relevant paragraph).
Check that the front and rear skirts (C and D) slightly rub on the ground. Check the skirts for integrity, cuts or tears, which
can reduce the machine vacuum capabilities. Note that the front skirt has typical vertical cuts (E). If necessary replace the
front and/or rear skirts (see the procedure in the relevant paragraph).
A
D
B
E
C
C
D
A-B
0-2 mm
0-0.08 in
S301593
1.
2.
3.
4.
