DRIVE SYSTEM
SERVICE MANUAL
ENGLISH
Edge 28B
1463165000(1)2007-02
25
DRIVING BELT DISASSEMBLY/ASSEMBLY
Disassembly
Remove the hood (see the procedure in the relevant paragraph).
Place a suitable shim (B) under the machine frame area (A) in order to keep the right wheel (C) lifted and remove it.
Remove the retaining ring and the washers (D), then remove the right wheel (C).
Move the belt (E) by hand and disengage the belt (F) from the pulley (G).
Loosen the adjusting nut (H) of the clutch (I).
Remove the washer (J). When reassembling, do not use the old washer, replace it with a new one.
Remove the belt (F) by routing it between the plate (K) and the bracket (L).
Check the tensioner (M) and the spring (N) for proper operation.
Assembly
Perform steps 4 to 8 in the reverse order.
Visually inspect and adjust the driving belts and clutch (see the procedure in the relevant paragraph).
Perform steps 1 to 3 in the reverse order.
D
C
G
B
A
F
H
K
L
J
I
E
M
N
S301603
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
