13
CYCLE SCREENS
TOUCH SCREEN DISPLAY
TIME & STATUS SCREEN
The TIME & STATUS screen is displayed any time the
washer is running a cycle. This screen displays the
selected cycle at the top of the screen above the cycle
progress bar and the estimated time remaining in the
cycle. The animated graphics on the lower left side of
the screen displays the current stage of the cycle.
OPERATING CYCLE
The name and icon for the running cycle is displayed
at the top of the screen.
PROGRESS AND TIME DISPLAY
After the cycle has been started, the washer will
display the progress bar and the estimated time
remaining for the duration of the wash cycle.
CYCLE STAGE
Displays the stage of the operating cycle: Delayed
Start, Load sensing, Filling, Washing, Rinsing and
Spinning. Each stage is shown with its own animated
display below the words.
PAUSE
If the washer is running, use this button to pause the
cycle without losing the current settings. When touched,
the PAUSE button changes to a START button. When the
lid is unlocked, the button will split, giving the option to
either cancel or resume the cycle.
A
B
C
B
C
NOTE
: The TIME & STATUS screen will be dimmed
after four minutes of inactivity. Touch the screen to
brighten it again. The CYCLE COMPLETE screen will
be displayed when the cycle is complete.
D
A
D
The CYCLE COMPLETE screen will be displayed at the
end of the cycle. Touch the HOME button to return to the
HOME screen. After four minutes of inactivity, the CYCLE
COMPLETE screen will be dimmed, and the control will
shut off one minute later.
