Kemppi X5 FastMig Manual 400, Operating Manual

Page: 65 / 214

X5 FastMig
Operating manual - EN
Hot start
Min/Max = -30 ... +30, step 1
Default = 0 Welding function that uses higher or lower
welding current at the start of the weld.
During the Hot start period the current
changes to the normal welding current
level. The Hot start value affects the current
level and duration. Use it to prevent the
electrode from sticking to the work piece.
VRD
OFF/12V/24V
Default = OFF Voltage reduction device (VRD) reduces
the open-circuit voltage to maintain below
a certain voltage value.
Current limit min
Min/Max = 10 ... machine size A, step 1
Default = 10 A Minimum and maximum limits for the cur-
rent adjustment.
Current limit max
Min/Max = 10 ... machine size A, step 1
Default = 10 A
Common settings
The parameters listed here are common system settings.
Parameter Parameter value Description
Weld data
Min/Max = 0 ... 10 s, step 1
0 = OFF
Default = 5 s This defines how long the weld data sum-
mary is shown after each weld.
Display off
Min/Max = 5 ... 120 min, step 1
Default = 5 min Not available with MMA or gouging.
Date
Current date Adjusting date:
Select day by pressing the knob key
Adjust day by rotating the knob (Min/Max
= 1...28/29/30/31)
Select month by pressing the knob key
Adjust month by rotating the knob
(Min/Max = 1...12)
Select year by pressing the knob key
Adjust year by rotating the knob (Min/Max
= 2000...2099)
Press the knob key to end adjustment.
Time
Current time Adjusting time:
Select hours by pressing the knob key
Adjust hours by rotating the knob
(Min/Max = 0...23)
Select minutes by pressing the knob key
Adjust minutes by rotating the knob
(Min/Max = 0...59)
Press the knob key to end adjustment.
Time counter total
>>> This shows the total arc time and power on
time.
Time counter since
>>> This shows the total arc time and power on
time since the last reset.
Reset time counter
Reset This resets the time counter.
Language
Available languages
© Kemppi 66 1920960 / 2039