Kemppi X5 FastMig Manual 400, Operating Manual

Page: 82 / 214

X5 FastMig
Operating manual - EN
throughout the power range (short arc, globular arc and spray arc). WiseFusion is compatible with 1-MIG welding pro-
cess.
>> To take WiseFusion into use, go to the control panel's Welding parameters view and apply the WiseFusion
feature.
>> To adjust the welding power/wire feed speed, in the control panel's Home view , turn the left control knob.
>> To fine tune the heat output while welding, in the control panel's Home view , turn the right control knob.
For more information on Wise products, visit www.kemppi.com.
3.4.3 WisePene
Available with automatic 1-MIG-enabled equipment only.
In standard MIG/MAG welding, changes in stick-out length cause welding current to fluctuate. WisePene
maintains constant welding current by controlling the wire feed speed according to the stick-out length. This
ensures stable and effective penetration and prevents burn through. WisePene also adjusts the voltage
adaptively, which keeps the arc focused and optimally short. WisePene enables welding with Reduced Gap
Technolology (RGT) and is compatible with 1-MIG welding process.
>> To take WisePene into use, go to the control panel's Welding parameters view and apply the
WisePene feature.
>> To adjust the welding current while welding, in the control panel's Home view , turn the left control knob.
>> To fine tune the heat output while welding, in the control panel's Home view , turn the right control knob.
For more information on Wise products, visit www.kemppi.com.
3.4.4 WiseSteel
Available with automatic 1-MIG-enabled equipment only.
The WiseSteel function is based on modifying the conventional MIG/MAG arcs to enable higher quality of welds.
WiseSteel improves the arc control, reduces spatter and helps create an optimally-formed weld pool.
>> To take WiseSteel into use, go to the control panel's Welding parameters view and apply the WiseSteel fea-
ture.
>> To adjust the welding power/wire feed speed while welding, in the control panel's Home view , turn the left
control knob.
>> To fine tune the heat output while welding, in the control panel's Home view , turn the right control knob.
© Kemppi 83 1920960 / 2039