X5 FastMig
Operating manual - EN
If the coolant liquid overheats, a thermal cutoff switches the welding system off and does not allow it to be used until
the coolant liquid has cooled down.
5.
Coolant circulation warning
>> The LED is green when the coolant circulation is working normally.
>> The LED is red when there is a problem in the coolant circulation.
If the circulation of the coolant liquid is obstructed, a thermal cutoff switches the welding system off. Check and fix the
error before using the welding system again.
Rear:
1.
Power switch
2.
Control cable connector
3.
Control cable connector
4.
Mains cable
5.
Welding current cable connector, plus (+) connector
6.
Earth return cable connector, minus (-) connector
7.
Rear locking interface
>> For locking on top of the cooling unit or on the cart.
© Kemppi
10
1920960 / 2039
Summary of Contents for X5 FastMig Manual 400
