Kemper EVOLUTION LINE, Operating Manual

Page: 145 / 204

Operation
Emil Kemper GmbH EVOLUTION LINE roll machine
137

Touch the N
UMBER OF TRAYS
input box (4).
A keypad appears for entering numbers.

Enter the number of trays on the pull-out table.

Touch the R
OWS
(
LONGITUDINAL
) input box (5).
A keypad appears for entering numbers.

Enter the number of dough piece rows on the wooden tray/baking tray.

Touch the S
TEP CORRECTION
input box (6).
A keypad appears for entering numbers.

Enter the start time in pulses for the reciprocating belt's step between depositing
patterns.

Touch the D
EPOSITING CORRECTION
input box (7).
A keypad appears for entering numbers.

Enter a correction value in millimetres per piece if the calculated speed for control of
depositing is not correct.

Under S
TEP LENGTH
[
MM
] (8), touch an input box of your choice.
A keypad appears for entering numbers.
The respective step length is listed for each tray (wooden trays/baking trays) below the
S
TEP LENGTH
[
MM
] input box.

Enter a new step length in millimetres if you want to change the step length of the
respective tray (wooden trays/baking trays).