Kemper EVOLUTION LINE, Operating Manual

Page: 87 / 204

Description of the line
Emil Kemper GmbH EVOLUTION LINE roll machine
79
In the 'Cutting station' sub-menu you can change the data for controlling the cutting
station by touching the input boxes:
O
PTION
Selection of 'Auto' or ’Manual'. 'Auto' means that the cutting station starts to
run when the first dough pieces arrive. 'Manual' means that the cutting
station runs constantly.
C
UTTING
STATION
'On' or 'Off' in the 'Cutting station' box causes the line module to be
switched on or off.
C
ENTERING
UNIT
A value between 5 and 200 pulses can be entered in the 'Centering unit'
box to set the timing.
In the 'Knife running time' submenu you can compensate for the triangular knife's different
running times during the outward and return strokes. Password level 1 is required for this
input.
A
NTI
-
CLOCKWISE
DRIVE
An input between 100 and 200 milliseconds to compensate for the
triangular knife's different running times.
C
LOCKWISE
DRIVE
An input between 100 and 200 milliseconds to compensate for the
triangular knife's different running times.
Start
Stop
11:27:35
14000 pcs/h Head machine
Line
1
0
Cutting station
Centering unit
Cutting station
Knife running time
(Specified air pressure
Option
Off
Auto
Ip 0
Anti-clock.drive
Clockwise drive
0
0
msec.
msec.
is 5 bar)