Kemper EVOLUTION LINE, Operating Manual

Page: 172 / 204

Cleaning and maintenance
164
EVOLUTION LINE roll machine Emil Kemper GmbH
8.3.8.2 Inspecting and replacing the triangular knife

Carry out the preparations (see section "8.3.1 Preparations").
Cutting hazard
Pay attention to the triangular knife during maintenance work. There is the
risk of hand injuries.

Inspect the triangular knife for damage. Replace it if applicable.
Loosen the setscrew (1).
Loosen the locking screw (2).
Turn the adjusting screw (3) in the direction of
the arrow until the knife holder (4) can be
removed.
Loosen the two countersunk screws (1) to be
able to remove the triangular knife from its
holder (2).

Fit the triangular knife in reverse order.
Note!
Check the cutting position after replacing the triangular knife. Adjust the
cutting position if applicable.