Kemper EVOLUTION LINE, Operating Manual

Page: 91 / 204

Description of the line
Emil Kemper GmbH EVOLUTION LINE roll machine
83
P
ARAMETER
button
The following menu appears after pressing the P
ARAMETER
button:
In the 'Reciprocating belt menu', touch the respective input boxes to change the control
values for the reciprocating belt:
S
TART
RECIPROCATING
BELT
Input of the distance in millimetres from the first row of pieces of
dough to the desired row.
R
ECIPROCATING
LENGTH
Input of the reciprocating length of the reciprocating belt in millimetres.
S
IZE OF MOULD
Input of the size of the wooden board/baking tray in millimetres.
S
HAPED SIZE
Input of the shaped sizes located on the extending table.
R
OWS
(
LONGITUDINAL
)
Input of the number of rows of pieces of dough located on the wooden
board/baking tray.
C
ORRECTION STEP
Input of a correction value for the step of the reciprocating belt
between the pulsed placement images.
C
ORRECTION
PLACEMENT
Input of a correction value. The calculated speed of the control unit for
the placement can be adjusted here if it is not correct.
S
TEP LENGTH
Input of ten step lengths for the realization of various placement
images.
80
50
30
50
50
Start Stop
11:27:35
14000 pcs/h Head machine
Line 1
0
'Reciprocating belt
Start reciprocating
Reciprocating length
Shaped size
Rows (longitudinal)
Size of mould
Step length [mm]:
1=
3=
5=
7=
9=
mm
mm
mm
mm/pc
70
Correction step
Correction
Ip
pc
pc
2=
4=
6=
8=
10=
50
60
70
60
10
500
600
2000
5
0
0.00