Kemper EVOLUTION LINE, Operating Manual

Page: 168 / 204

Cleaning and maintenance
160
EVOLUTION LINE roll machine Emil Kemper GmbH
8.3.7 Centering unit
Note!
The schematic diagram below describes the centering unit. The version
that is delivered may differ from the version shown here.
Configuration of the line module Centering unit in the line is displayed in section
"5 Overview of the line".
8.3.7.1 Cleaning the centering flap

Carry out the preparations (see section "8.3.1 Preparations").
Pull the index pin (1) from the centering flap (3)
in the direction of the arrow (3).
Turn the index pin (1) 90 degrees in the
direction of the arrow (4).
Pull the centering flap (1) off the holder by the
handle (2) in the direction of the arrow (3).