Kemper EVOLUTION LINE, Operating Manual

Page: 135 / 204

Operation
Emil Kemper GmbH EVOLUTION LINE roll machine
127
7.4.12 Setting the alignment and pressure roller (timing roller)
Configuration of the line module Alignment and pressure roller in the line is displayed in
section "5 Overview of the line".
7.4.12.1 Setting the height of the alignment and pressure roller
Turn the adjusting wheel (1)
–
anti-clockwise(2) to lower the pressure roller,
–
clockwise (3) to raise the pressure roller.
7.4.12.2 Setting a recipe at the alignment and pressure roller
Note!
The menu item 'Timing roller' can be accessed in the main menu of the
respective assembly after pressing the P
ARAMETER
button (see section
"7.3 Setting assemblies")!
In the menu item 'Timing roller', you can change the settings of the alignment and
pressure roller in the respective assembly.
Note!
After touching the input boxes, a keypad appears for entering numbers.
Confirm your entry via the keypad
The following illustration displays the menu excerpt of an assembly with the menu item
'Timing roller':
1
Touch the triangle (1) in the drop-down menu
in the menu item 'Timing roller'.
Ip
Timing roller
Start of following
Runtime
Ip
Off