Lubrication and Maintenance
KM00321,00008BB -19-26FEB19-3/3
KM00321,00002DD -19-10MAY10-1/1
KM00321,00002CF -19-03MAY10-1/1
KM00321,00002D0 -19-03MAY10-1/1
Rotary harvesting units for FENDT forage harvesters
Rotary harvesting units up to serial no. 131199:
Bevel gear drive (A) is filled with HD 85 W-140 Oil - 0,9 L
(0.24 U.S. gal.)
Rotary harvesting units starting with serial no. 131200:
The bevel gear drive (A) is filled with Mobil SHC 460 gear
oil - 0.9 L (0.24 U.S. gal.)
A—Bevel gear drive - 0.9 L
(0.24 U.S. gal.)
KM1002339
—UN—14AUG12
Changing Oil
IMPORTANT: Oil in the drives must be changed
after the first 100 hours of operation and
then every 500 hours.
Drain the oil while it is hot (i.e. after operation). Remove
filler plug (B) and drain plug (A), drain oil into a suitable
container. Clean drain plug (A) before re-installing. Add
the correct quantity of oil.
IMPORTANT: Do not overfill as this will result in
overheating and oil leakage.
Every 10 Hours - Rotating Blades and
Cleaners
Check all rotating blades (A) and cleaners (B) for wear.
Replace worn parts (see Service Section).
A—Rotating Blade
B—Cleaner
KM1001
198
—UN—07OCT14
Every 10 Hours - U.J. Shaft
Lubricate with grease.
KM1001
199
—UN—03MA
Y10
50-8
031519
PN=102
Summary of Contents for 345plus
Page 6: ...Contents iv 031519 PN 4 ...
Page 126: ...Index Index 4 031519 PN 4 ...
