Kemper 345plus, Operator'S Manual

Page: 62 / 126

Attaching to a KRONE Forage Harvester
KM00321,000053F -19-14JUN16-7/7
KM00321,000018C -19-21JUN12-1/1
KM00321,0000363 -19-19DEC14-1/1
8. Connect wiring harness for height control and row
guidance (steering assistance) options to socket (A).
9. Connect wiring harness for rotary harvesting unit
lighting to socket (B) on the forage harvester.
10. Connect the hydraulic hoses for the folding function of
the rotary harvesting unit to hydraulic outlets (III) and
(IV) on the forage harvester.
A—Socket
B—Socket III— Hydraulic Connection
IV— Hydraulic Connection
KM1002321
—UN—20JUN12
Connect Clearance and Indicator Light
Wiring Harness (375
plus
and 390
plus
)
NOTE: Models 375
plus
and 390
plus
are equipped
with clearance and indicator lights in the
lateral protective brackets.
Connect the clearance and indicator light wiring harness
to the socket provided on the forage harvester.
A—Clearance and Indicator
Lights
KM1000973
—UN—20AUG09
Switch Off Reverse when Idling
To switch off Reverse when Idling, the following parameters
must be changed in the forage harvester software:
Parameter BIG X (Header Range)
No. Level Recommended setting Description
25241 Service 65000
IMPORTANT: Ex factory, the
maximum adjustable
value is 20000. Your
Krone dealer can increase
this value in the developer
range to 65000.
This is the delay that comes after
the "Raise Lifting Gear" button is
pressed before feed and harvesting
unit start up in reduced idle.
25242
Service
0
Duration of reversing of rotary
harvesting unit after delay has
ended.
25478 Operator 0 Dynamic header speed control can
be activated and deactivated.
0 = Dynamic header speed
deactivated
22-11 031519
PN=62