manualshive.com logo in svg

Kemper 345plus, Operator'S Manual

Introducing the Kemper 345plus, a revolutionary agricultural machinery designed to optimize your farming operations! Enhance your productivity with this cutting-edge equipment by accessing its comprehensive Operator's Manual, available for free download at manualshive.com. Maximize the potential of your Kemper 345plus with this essential manual, providing expert guidance for smooth and efficient usage.

Share
Download
background image

Index

Page

Lenght of Cut and Drum Speeds

CLAAS Forage Harvesters

Type 493.............................................................. 35-5

Length of cut and drum speeds

CLAAS forage harvesters

Types 492 and 496.............................................. 35-4
Types 494, 497, and 498................................... 35-10

Length-of-cut adjustment

CLAAS forage harvester ......................................... 35-3

Loading with a crane .................................................. 15-2
Lubricant Storage

Storage, Lubricant................................................... 50-3

Lubricants

Fluid Grease for Drives ........................................... 50-1
Mixing...................................................................... 50-3

Lubrication and maintenance

Daily maintenance ................................................ 50-12
Every 10 hours........................................................ 50-9

Lubrication and Maintenance

10 Hours ................................................................. 50-8
50 Hours ...................................................... 50-9, 50-11
After Each Harvesting Season.............................. 50-13
Every 50 Hours ..................................................... 50-10
Oil Level, Check............................................. 50-4, 50-6
Weekly Service ..................................................... 50-13

M

Machine design life..................................................... 65-1
Metric bolt and screw torque values ........................... 55-1
Mixing lubricants......................................................... 50-3
Multi-Speed Drive for CLAAS Forage Harvesters .... 35-13
Multi-speed transmission for CLAAS Forage

Harvesters

Lengths of cut ....................................................... 35-15

O

Oil

Transmission........................................................... 50-2

Oil Levels.................................................................... 50-4
Operating Speed

Adjustment .............................................................. 35-3
Gathering Drums..................................................... 35-3

Operating the rotary harvesting unit

Driving with rotary harvesting unit attached ............ 35-2
Harvesting............................................................. 35-16
Principle of Operation ............................................. 35-1
Starting the forage harvester .................................. 35-2
Whole-crop silage ................................................. 35-16

Option

Automatic height control ......................................... 40-1

Oscillating frame, unlocking........................................ 23-5

Page

P

Preparing the forage harvester

Ballasting ................................................................ 20-7

Principle of Operation ................................................. 35-1

R

Reversing ................................................................... 35-2
Rotary harvesting unit, attach

Adjusting channel width .......................................... 20-7
Attaching to CLAAS forage harvesters

Feed plates, install .............................................. 20-8
Rotary harvesting unit with oscillating frame ..... 20-12
Rotary harvesting units with multi-speed

transmission and quick coupler ....................... 20-13

Rotary harvesting unit, operation

CLAAS forage harvester, length-of-cut

adjustment............................................................. 35-3

Rotating Blades

Direction of Cut ....................................................... 55-6
Installation............................................................... 55-6

S

Safety

Operator ability........................................................ 05-2

Safety decals .............................................................. 10-1
Scraper adjustment .................................................... 55-8
Serial Number Plate ................................................... 70-1
Service

Start of season........................................................ 60-1

Slip clutch

Removal.................................................................. 55-3

Slip Clutch

Disassemble ........................................................... 55-5
Main Drive...................................................... 55-2, 55-5
Pressure Relief and Service ................................... 55-2

Sound level................................................................. 65-2
Specifications

345plus Rotary Harvesting Unit .............................. 65-1
360plus Rotary Harvesting Unit .............................. 65-1
375plus Rotary Harvesting Unit .............................. 65-2
390plus Rotary Harvesting Unit .............................. 65-2
Sound level ............................................................. 65-2

Starting the forage harvester ...................................... 35-2
Steering sensor

Check voltage readings. ......................................... 55-9

Storage

Service before start of season ................................ 60-1

Synthetic lubricants .................................................... 50-3

T

Tilt Frame, Lock .......................................................... 30-6

Continued on next page

Index-2

031519

PN=2

Summary of Contents for 345plus































































































































Reviews:

No comments

Related manuals for 345plus

GE Ettan IPGphor 3 Instrument User Manual preview
Ettan IPGphor 3
Brand: GE Pages: 64
GE AMX 4+ Technical Publications preview
AMX 4+
Brand: GE Pages: 56
GE AMX 4+ Technical Manual preview
AMX 4+
Brand: GE Pages: 132
GE AKTAprocess Site Preparation Manual preview
AKTAprocess
Brand: GE Pages: 16
GE Logiq 500 Advanced Reference Manual preview
Logiq 500
Brand: GE Pages: 474
Raytheon V700 Instruction Manual preview
V700
Brand: Raytheon Pages: 69
Galaxy Audio RM2 Operation Manual preview
RM2
Brand: Galaxy Audio Pages: 24
Ransomes HR 9016 Turbo Parts And Maintenance Manual preview
HR 9016 Turbo
Brand: Ransomes Pages: 282
Jacobsen Ransomes HR 6010 Operator'S Manual preview
Ransomes HR 6010
Brand: Jacobsen Pages: 10
Jacto PR-40 Operator'S Manual preview
PR-40
Brand: Jacto Pages: 64
Nabtesco Symphony NK-6 User Manual preview
Symphony NK-6
Brand: Nabtesco Pages: 26
Radial Engineering HDI Owner'S Manual preview
HDI
Brand: Radial Engineering Pages: 16
R&S SMB100B Getting Started preview
SMB100B
Brand: R&S Pages: 61
Rane SM26 Operating & Service Manual preview
SM26
Brand: Rane Pages: 6
Rane MP 4 Operation Manual preview
MP 4
Brand: Rane Pages: 27
Ranger Products RD-18G Installation And Operation Manual preview
RD-18G
Brand: Ranger Products Pages: 6
Rane SEVENTY Service Manual preview
SEVENTY
Brand: Rane Pages: 88
Haag-Streit AT 900 Instructions For Use Manual preview
AT 900
Brand: Haag-Streit Pages: 21

Brands by name

Popular brands

Load more brands