![background image](http://html1.mh-extra.com/html/keithley/3700-series/3700-series_user-manual_3935064032.webp)
Series 3700 System Switch/Multimeter User's Manual
Section 2: Using the Front Panel
3700S-900-01 Rev. C / July 2008
2-7
Figure 2-6: MAIN MENU display
Channel type indication
When selecting channels, the following information is displayed, which indicates
the channel type on the front panel.
For switch channels, the name of the assigned DMM configuration (for
example, “nofunction”, “dcvolts”, “my4wire”, and so on) is displayed and
below it, the channel state (for example, OPN or CLS, along with 2 or 4 for
pole setting) is displayed.
For digital I/O channels, DIGITAL IO appears and below the channel
number is DIG IN or DIG OUT to indicate the channel mode.
For totalizer channels, TOTALIZER appears and below the channel number
is Fall Ed or Rise Ed to indicate mode edge.
For DAC channels, DAC OUTPUT appears and below the channel number
is pv1, off, and so on to indicate protection, function, and output enable.