![background image](http://html.mh-extra.com/html/samsung/sdn-550/sdn-550_quick-reference-manual_356094001.webp)
© Goodson Wainwright Associates Ltd. 2007 (Samsung Techwin Technical Support)
SDN- 550 Quick Reference Guide
Factory Default Settings:
LENS =…………………….…DC
SHUTTER =…………………..- - - (Auto)
WHITE BAL=……………..….ATW
BACKLIGHT =……………….OFF
AGC =…………………….…..NORMAL
SSNR=………………….……LOW
SENS-UP=…………………...OFF
<SPECIAL>
CAMERA ID =…...................OFF
COLOR (Day mode)………..ON
SYNC…………………………INTERNAL
Motion Detection…………....OFF
PRIVACY =……………….....OFF
MIRROR =……………….…..OFF
SHARPNESS =………………ON (25/31)
To enable Sens-up function
1. Press SETUP
2. Press
6x « SENS-UP »
3. Press 1x « AUTO »
4. Press SETUP 1x
5. The default setting is « 8x »
6. Adjust the level using and (it is
recommended that no more than 8x is set for
general use)
7. Press SETUP 1x
8. Press 2x
9. Select « EXIT » then « SETUP » to exit menu.
To change settings for WHITE BAL:
1. Press SETUP at the rear of the camera.
2. Press
2x
3. « WHITE BAL. » Press 1x
4. « MANUAL » Press SETUP 1x
5. Adjust the RED and BLUE levels if necessary.
6. Press SETUP 1x
7. Press 6x
8. Select « EXIT » then « SETUP » To exit menu.
OR:
(AWC)
1. Press SETUP at the rear of the camera.
2. Press
2x
3. « WHITE BAL. » Press 2x
4. Now hold a white card in front of the lens so that it fills
the screen, but still reflects light.
5. « AWC » Press SETUP and hold for 3 seconds.
6. Press 6x
7. Select « EXIT » then « SETUP » to exit menu.
Info :
•
The OSD Menu will disappear after 1 minute if no
buttons are pressed.
•
A common cause of NO PICTURE is the incorrect
setting of the DC/VIDEO switch at the rear of the
camera. Check this option first.
•
In The case of unexplained faults with the camera,
select the RESET option from the SPECIAL menu.
To Adjust the Lens Brightness Level:
1. Press the SETUP Button on the back of the
camera
2. « LENS » is selected
3. Press SETUP 1x
4. « BRIGHTNESS » Use and to adjust
the brightness level.
5. Press SETUP 1x
6. Select « EXIT »
7. Press SETUP 1x to exit menu
To set Manual Lens and Shutter option:
1. Press SETUP at the rear of the camera.
2. « LENS » Press 1x “MANUAL”
3. Press
1x
4. « SHUTTER » Press 1x
5. « MANUAL » Press SETUP 1x
6. Adjust the shutter speed (Default = 1/50. 1/120000 max.)
7. Press SETUP 1x
8. Press 7x
9. Select « EXIT » option
10. Press « SETUP » 1x to exit menu.
To enable SPOTLIGHT function (a function of BACKLIGHT):
1. Press SETUP at rear of camera
2. Press
3x « BACKLIGHT »
3. Press 4x SPOTLIGHT (Reduces areas of bright or
reflected light in the image)
4. Press SETUP 1x
5. Adjust the size and the position of the box on the screen,
using the functions 1.TOP; 2.DOWN; 3.LEFT; 4.RIGHT. For
example: select 1. DOWN using 1x. Adjust the values and
therefore the depth of the box, using and .
6. To exit, select option 5 « END ». Press SETUP 1x
7. Press 5x
8. Select « EXIT » then « SETUP » to exit menu.
Video Output
OSD Menu
buttons
DC/Video Lens switch
Power LED
Power Input
Control input for
Day/Night
Output from
Motion Detection