Section 4: Close-open overview
Series 3700 System Switch/Multimeter User's Manual
4-4
3700S-900-01 Rev. C / July 2008
Figure 4-2: Matrix card display
Selecting a range of channels on the front panel
You can perform operations on a single channel or range of channels. Specify a
channel range by selecting a starting channel number and ending channel
number. When you request an operation be performed on a range of channels,
the Series 3700 performs the same operation on all channels within the channel
range.
To select a channel range on the front panel (as an example a range of
Channels 1003 through 1005):
NOTE
A single channel is selected when the starting and ending channel for
a range match.
You cannot explicitly select an analog backplane relay on the front
panel interface. You can only associate a backplane relay with a
switching module channel. Refer to
Channel attributes
(on page 4-7)
for further details.