Series 3700 System Switch/Multimeter User's Manual
Section 2: Using the Front Panel
3700S-900-01 Rev. C / July 2008
2-27
MENU key
Press the
MENU
key to open the MAIN menu.
The MAIN menu contains the following items:
SCRIPT:
Opens the SCRIPT menu that contains LOAD and SAVE menu
items.
SETUP:
Opens the SETUP menu that contains SAVE, RECALL,
POWERON, and RESET menu items.
GPIB:
Opens the GPIB menu that contains ADDRESS and ENABLE menu
items.
LAN:
Opens the LAN menu that contains STATUS, CONFIG, APPLY,
RESET, and ENABLE menu items.
TSPLINK:
Opens the TSPLINK menu that contains NODE and RESET
menu items.
UPGRADE:
Upgrades the firmware on the unit and installed cards (see
Upgrade procedure using USB flash drive
(on page 7-1)). This menu
includes three options (YES, NO, and PREVIOUS).
CHANNEL:
Opens the CONNECT menu that allows you to select a rule
(BBM, MBB, or OFF), or to connect sequentially (ON or OFF setting).
Related ICL commands: channel.connectrule and
channel.connectsequential.
DISPLAY:
Opens the DISPLAY menu. Select the
TEST
item to open the
DISPLAY TESTS menu, which contains KEYS and DISPLAY-PATTERNS
menu items. Use
KEYS
to verify the operation of the keys. Use
DISPLAY-
PATTERNS
to verify each segment of the display.
DIGIO:
Opens the DIGIO I/O menu that is used to set DIGIO-OUTPUT and
WRITE-PROTECT menu items.
BEEPER:
Enables or disables the beeper, along with selection KEYCLICK
option.
SYSTEM-INFO:
Opens the SYSTEM INFORMATION menu that can query
FIRMWARE, SERIAL#, and CAL information.