Table 12-3
OUTPut command summary (refer to Tables 2-3 and 5-2)
Command
Description
Default
parameter
SCPI
:OUTPut[1]
OUTPut subsystem for channel #1 (battery channel)
✓
[:STATe] <b>
Turn output ON or OFF.
OFF
✓
[:STATe]?
Query state of output.
✓
:BANDwidth
Specifies HIGH or LOW bandwidth when the output state is ON
and current range is set to 5A. When output is OFF, the band-
width is LOW. When current range is 5mA, bandwidth is
LOW.
LOW
1
:BANDwidth?
Query bandwidth setting for when output is ON and not on
5mA range.
:IMPedance <NRf>
Specifies the output impedance to apply 0 (OFF) to 1
Ω
(max) in
10m
Ω
steps.
0
:IMPedance?
Query impedance setting.
:RELay1 <name>
Close (ONE) or open (ZERO) relay control circuit for relay 1.
2
ZERO
:RELay1?
Query the value at relay 1 port pin digital I/O.
2
:RELay2 <name>
Close (ONE) or open (ZERO) relay control circuit for relay 2.
2
ZERO
:RELay2?
Query the value at relay 2 port pin digital I/O.
2
:RELay3 <name>
Close (ONE) or open (ZERO) relay control circuit for relay 3.
2
ZERO
:RELay3?
Query the value at relay 3 port pin digital I/O.
2
:RELay4 <name>
Close (ONE) or open (ZERO) control circuit for relay 4.
2
ZERO
:RELay4?
Query the value at relay 4 port pin digital I/O.
2
:OUTPut2
OUTPut subsystem for channel #2 (charger channel)
✓
[:STATe] <b>
Turn output ON or OFF.
OFF
✓
[:STATe]?
Query state of output.
✓
:BANDwidth
Specifies HIGH or LOW bandwidth when the output state is ON
and current range is set to 5A. When output is OFF, the band-
width is LOW. When current range is 5mA, bandwidth is LOW.
HIGH
:BANDwidth?
Query bandwidth setting for when output is ON and not on
5mA range.
:BOTHOUTON
:BOTHOUTOFF
Turns both power supply channels ON.
3
Turns both power supply channels OFF.
3
1
Default is HIGH for firmware version B02 and lower (does not apply to Model 2306-PJ).
2
Model 2306-VS does not support relay control.
3
No query or short form exists.
SCPI Tables 12-5
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Summary of Contents for 2302
