4
5
DISENGAGE
THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
FIGURE 10
Winch Installation
Correct installation of your Winch is required for proper operation. Installation should be on a flat surface
following the bolt pattern shown in
FIGURE 10.
Read and follow directions carefully to ensure proper Winch alignment and trouble free operation.
This Winch
MUST
be mounted with the synthetic rope in the under-wind direction
(FIGURE 8)
.
MUST
use only genuine Keeper Winch replacement parts
.
!
!
WARNING
Improper mounting could damage your Winch
and void your warranty.
!
!
DO NOT EXCEED THE RATING OF YOUR RECIEVER HITCH
Mounting Plate
Aluminum Hawse
Fairlead
Synthetic Rope
Under-wind
Direction
WARNING
Your Keeper Winch Synthetic Rope comes ready for
installation. Please follow these steps for a simple instal-
lation.
Please note that Synthetic Winch Rope (SWR) is very sensitive
to abrasion. Therefore, please check the winch drum, inboard
drum flanges and aluminum hawse (it is recommended that
you use an Aluminum Hawse instead of a roller fairlead) for
any sign of burrs, nicks or any damage that may harm the
SWR. Please sand smooth over any imperfections that you
might find before installing the SWR.
A. Please mount the winch and aluminum hawse to the
included mounting plate.
*INCLUDES MOUNTING PLATE
