A100
Displays and operating elements
Operating instructions V1.03
15
© KEBA
4
Displays and operating elements
4.1
Operating panel
The operator panel is on the front side of the KeMes A100. It is used for op-
eration and status indication.
Fig. 4-6: Control panel
The operator panel consists of:
●
1 display
●
1 operating button
4.1.1
Display
The display is used for the following tasks:
●
Display of system menus
●
Display of measured data
●
Display of state of charge
4.1.2
Operating button
All control of the device is executed by the operating button.
Operating button
Meaning
Press 1x briefly
●
Switch on the device and activate the mode used
most recently
●
Manual termination of a measurement
●
Restarting a measurement
Press 2x briefly
●
End measurement
●
Return to the preceding menu item
●
Switch off the device from the main menu
Press and hold
●
Navigate forward within the menu level
●
Increase set value
●
Switch from individual measurement to continuous
measurement
●
Execute selected action
Press 1x briefly, then press
and hold
●
Navigate backward within the menu level
●
Reduce set value
