A100
Introduction
Operating instructions V1.03
7
© KEBA
1
Introduction
Information
This product contains the open source SSL library "mbed TLS" that is li-
censed under the Open Source license Apache
TM
2.0.
A use of this product or parts thereof is only allowed with in conformity with
the Apache
TM
License 2.0. A copy of this license can be found in "Appendix:
Apache TM License"
1.1
Purpose of the document
This document describes the KeMes A100 measurement device. In addition,
it lists information about use and operation.
1.2
Intended use
KeMes A100 is intended for measuring angles between two flat surfaces and
measuring sheet metal parts. KeMes A100 is intended for indoor use.
KeMes A100 is designed for applications in the industrial setting. It may only
be used for the types of use detailed in the technical description and only in
compliance with the described technical framework conditions.
KeMes A100 has been developed, manufactured, tested and documented in
compliance with the relevant instructions and standards. Therefore, provided
that the instructions and safety precautions are properly observed, the prod-
uct does not pose any danger to the health of persons or a risk of damage to
other property or equipment under normal circumstances.
1.3
Preconditions
This document is intended for specialist employees and trained personnel in
the industrial area who use KeMes A100.
1.4
Notes on this document
This manual is part of the product. It is to be retained over the entire life cy-
cle of the product and should be forwarded to any subsequent owners or
users of the product.
This documentation must be legible and available to the specified personnel
and must be read and understood by them.
